Intergrated solar street light

Difference between solar street light and street light?

The All in one solar street lights use sunlight as energy, absorbs sunlight during the day, and convert it into electrical energy, which is stored in the battery. At night, the battery is discharged through the battery to supply power to the lights source. It is green, safe, energy-saving, and durable. Save a lot of electricity and be maintenance-free. The integrated solar street lights have become the darling of road lighting, and it has attracted more and more attention from the general public.

When there is road construction, People are wondering whether to choose solar street lights or street lights, What is the difference between them.

solar street light supplier

  1. Comparison of installation

 The installation of the integrated solar street lights is relatively simple, without slotting or cable laying, only need to build a cement base and fix it with stainless steel screws, which saves the installation cost. The traditional city circuit lights need to use complicated procedures during the installation process, which requires a lot of manpower and material resources for engineering construction, such as cabling, trenching wiring, pipe threading, and backfilling.

  1. the cost comparison

 All integrated solar street lights use natural light to convert into electrical energy for illumination. Integrated solar street lights are a one-time investment and long-term benefits. Although the initial investment cost is relatively higher than that of the city circuit lights, it will not generate high electricity costs and maintenance costs in the later period. The cost can be recovered in 6-7 years, and more than 1 million electricity costs and maintenance can be saved in the next 3-4 years. cost.

solar led street light

cost of solar street light

Electricity street lights are expensive, and conventional power city circuit lights can use one kilowatt-hour a night, and require long-term uninterrupted maintenance of the route, especially in the case of long-term rainy and windy weather, unstable voltage, replacement of sodium lights and The cost of aging maintenance lines is increasing year by year.

  1. Comparison of maintenance

 Each integrated solar street light has an independent system, even if one of them has problems, it will not affect the normal use of other street lights. The city circuit lights need to be laid with underground cables, so once there is an abnormal power supply or cross construction of water and gas pipelines, it will bring many hidden dangers, maintenance will cause difficulties, and consume a certain amount of manpower and resources.

  1. Comparison of safety

 The integrated solar street lights are an ultra-low voltage product, which is safe, reliable, and non-hazardous during transportation. The city’s circuit lights will be affected by many factors, such as construction quality, abnormal power supply, product aging, scene engineering transformation, water and electricity pipeline transformation, and many other factors, which bring many hidden safety hazards.

solar new clean energy

      5. Comparison of the use

 The integrated solar street lights are put into use directly after installation, without manual management, the working mode and working brightness of the integrated solar street lights can be controlled through the smartphone app, the relevant operating data of the controller can be read, and displayed on the APP interface. The city circuit lights need to be managed manually, which increases the management cost virtually.

     6. Comparison of energy saving

 The integrated solar street lights use solar energy to generate electricity without consuming conventional power, and the solar street lights use LED light source, which is energy-saving and environmentally friendly. The city circuit lights need to be connected to the regular city power in order to be used normally.


clodesun was established in 2013. Headquartered in Shenzhen, it is a high-tech enterprise in China. It is a new energy high-tech company integrating R&D, production, and sales. CLOSE attaches great importance to the development of LED all-in-one solar street lighting technology.

battery of solar street light

Four kinds of solar street lights batteries?

Solar batteries are the main accessories in solar street lights. Currently, there are four types of batteries: lead-acid batteries, gel batteries, Li-ion lithium batteries, and LiFeP04 lithium batteries. The four types of batteries are commonly used in solar street lights. Which battery is the best? Let’s take a look at the characteristics of these four batteries:

 Lead-acid battery

Lead acid battery

The plates of lead-acid batteries are composed of lead and lead oxides, and the electrolyte is an aqueous solution of sulfuric acid. The main advantage of lead-acid batteries is that the voltage is relatively stable and the price is relatively cheap; the disadvantage is that the specific energy is relatively low, so the volume is much larger than ordinary batteries. The service life of lead-acid batteries is relatively short, generally 300-500 deep cycles. Maintenance is relatively frequent, but because of the price advantage, it is still widely used in the solar street lamp industry.

 Gel battery

Gel battery

It is equivalent to an upgraded version of a lead-acid battery. It is maintenance-free and solves the frequent criticism of lead-acid battery maintenance. Internally, the colloidal electrolyte is used instead of sulfuric acid electrolyte, and the storage capacity, discharge capacity, safety performance, and life are improved. , But sometimes even surpass the ternary lithium battery in terms of price. The gel battery can be used in the temperature range of -40 ℃-65 ℃, the low-temperature performance is better, and it can be used in the northern cold regions. It has good seismic performance and can be used safely under various harsh conditions. The service life is double or even more than ordinary lead-acid batteries.

 Li-ion lithium battery

Li Ion battery
The advantages of  Li-ion lithium batteries are many. It has a high specific energy, small size, fast charging, and high price. The number of deep cycles is about 500-800 times, the life is similar to that of gel batteries, and the temperature range used is -15℃-45℃. However, the ternary lithium battery also has disadvantages, and its battery is not stable inside. If it is a  Li-ion lithium battery produced by an unqualified manufacturer, it may happen that it may explode during the overcharge processor in a high-temperature environment. 

LiFeP04 Lithium  battery

solar street light battery price

LiFeP04 Lithium battery is a battery that integrates many advantages. It has a higher specific energy, small size, fast charging, long service life, and good stability, but the price is the highest of all batteries. The number of deep cycle charging is generally 1500-2000 times, a group of lithium iron phosphate batteries under normal use, can generally be used for 8-10 years, can be used in an environment of -40 ℃ -70 ℃, the use of temperature The scope is relatively wide.

1. The charge and discharge times of LiFePO4 Lithium battery are 2000 times, but Li-ion Lithium battery is only 800 times. The lifespan of LiFePO4 is 2.5 times that Li-ion.

2. In hot summer LiFeP04 Lithium battery is stable, but the Li-ion Lithium battery is easy on fire.

3. LiFePO4 battery is twice expensive as the Li-on lithium battery and more stable. The lifespan of LiFePO4 is 10 years, Li-ion battery is only 4 years.


It can be concluded from this that the use of  LiFeP04 Lithium battery in solar street lights is of course the best, but the price is relatively high. LiFeP04 Lithium battery is a domestically developed energy storage battery with mature and independent property rights.

There are many manufacturers, and the use conditions and safety protection are also very well done, so the use of a lithium iron phosphate battery is the best choice. Questions about solar street lights and solar batteries are welcome to interact with Belinda or

solar led street light

How to choose good quality solar led street lights

Whether it is on the main roads of the city, or on the roads and alleys in the country, whether in the factory or in the community, we can always see solar-led street lights. It is widely used in our lives. However, there is no uniform standard in the solar street light industry, so the quality of solar street lights from various manufacturers will be different, so how can consumers choose a good quality solar street light?

We mainly consider the following three aspects: solar panels, solar cells, and solar controllers.

1. How to choose a solar led street light controller

In the solar power generation system, the solar controller is a device that controls the solar battery to charge the battery and supply power. It works continuously throughout the day. It is best to control its power consumption below 1mAh to avoid consuming excessive power and affecting power generation efficiency. It is best to have a three-phase charging control mode of strong charge, balanced type, and floating charge to ensure power generation efficiency.

solar street light controller

The choice of controller type is very important:

The choice of controller is often an issue ignored by engineering companies. The quality of the controller varies, and the market price of 12V / 10A controllers ranges from 100-200 yuan. Although it is the smallest part of the entire street light system, It is a very important link. The quality of the controller directly affects the component life of the solar street light system and the use of the entire system.

(1) A solar controller with automatic power reduction should be selected. This controller can automatically reduce the output power of the load according to the remaining capacity of the battery. When the battery capacity is insufficient, the controller reduces the output current. After the battery capacity is restored, the controller restores the original output current to achieve the effect of power-saving. This function is very useful.

To select a controller with high charging efficiency, a controller with MCT charging mode can automatically track the maximum current of the battery board to avoid unnecessary charging waste.

Controllers with power adjustment should be selected. Controllers with power adjustment have been widely promoted, which can automatically reduce the working current of LED lights during the rare time of pedestrians at night, saving electricity and saving the configuration of battery panels. proportion.

(4) The controller is waterproof. Most of the controllers are installed on the base of the light pole. Especially in the rainy season, it is easy to enter the water. Therefore, the controller must choose a fully waterproof controller to extend the life of the system and reduce maintenance costs.

(5) In addition to the above power-saving functions, the controller should also pay attention to the protection function of the battery and other components. A controller with a trickle charging mode can protect the battery well, increase the battery life, and set up a controller. When under-voltage protection value, try to adjust the under-voltage protection value to ≥ 11.1V to prevent over-discharge of the battery. Over-charge and over-discharge of the battery will reduce the service life.

2. How to choose the solar panel 

First of all, we need to determine the photoelectric conversion rate of solar panels (conversion rate = power/area). What is closely related to this parameter is the panel. There are two types of monocrystalline silicon and polycrystalline silicon. Generally speaking, the conversion rate of polycrystalline silicon is usually about 14%. , The highest can only reach 19%, while the conversion rate of single crystal silicon can be as low as 17% and as high as 24%.

solar led street light

In terms of conversion rate alone, it is naturally better to choose solar panels with monocrystalline silicon panels, but the production cost of such panels is higher than that of polycrystalline silicon panels, so the unit price will be more expensive.

You can choose according to your needs when choosing; In addition, the formula for the conversion rate is that at the same power, the smaller the panel area, the higher the conversion rate.

A well-maintained solar street light can generally be used for more than 25 years, and if it is not properly maintained, it may have been used for two or three or even one or two years. Solar street light maintenance first talks about the maintenance of solar panels.

1. Stand and structure pay attention to wind protection: The stand is a support structure for solar panels. Because the solar panels are generally installed at the top of solar street lights, it is easy to cause top-heavy weight, and the solar energy is at high altitude, and it is easy to receive the constant impact of wind. If it is tilted or distorted, it may cause insufficient sunlight radiation and damage to the solar panel due to torsion.

2. The dust-proof surface of the solar panel: The solar panel generally has a service life of 25-30 years, but poor maintenance may reduce its life. Solar panels are most afraid of dust because dust will reduce the rate of sunlight acceptance, resulting in low power generation efficiency. Under normal circumstances, rainwater under natural conditions can help to clean, but for places with less rainfall and heavy wind and dust, you must pay attention to cleaning the dust on solar panels;

3, solar panels pay attention to hail and lightning strikes: Secondly, hail and lightning strikes threaten solar panels. Current solar street lights have anti-lightning functions and can withstand hail strikes in a certain range, but for areas, with more thunderstorms or extremes The situation still needs to be checked frequently, and it will still need to be checked after the increasing hailstorm.

3. How to choose a solar led street light battery

Good solar street lights must ensure sufficient lighting time and lighting brightness. To achieve this, the requirements for batteries are naturally not low. Currently, there are mainly two types of lead-acid batteries (gel batteries) and lithium iron phosphate batteries on the market. Traditional lead-acid batteries have stable voltages, are relatively cheap, and are relatively easy to maintain. However, such batteries have low specific energy, short life, and require frequent maintenance.

battery of solar street light

The rapid development of lithium iron phosphate batteries has obvious advantages in terms of discharge depth and charging time. The applicable temperature is as low as -45 ℃, and the application environment area is more extensive. Its life can reach 7 ~ 8 years, and it is more worry-free to use.

In addition, the volume and weight of lithium iron phosphate batteries are smaller than lead-acid batteries. It is the only choice. All the lithium iron phosphate batteries used in solar street lights from Nanlai have a long lighting time and sufficient brightness.

In short, although the solar street light is good, there will always be some fake and shoddy products on the market, which will cause trouble in the use process. When you choose it, you must examine it from various aspects. The configuration of the above three aspects must be the focus.

If you want to learn more about solar street lights, you can search our website or contact with the email:

all in one solar street light

How solar street light controllers works

Many people do not know how to adjust the solar street light time in the process of using solar street light controllers. Today we will answer this question.

The solar street light controller is also a device for data collection and monitoring control. It has a serial communication data transmission function, manages the charging and discharging of solar street lights, and long-distance intelligent control. Many people do not know how to adjust the solar street light time in the process of using solar street light controllers. Today clodesun will answer this question for you.

There are two adjustable times for solar street light controller:

1. Street light on time

2. The time that the street light stays on

solar street light controller

Generally, the solar street light controller does not have a built-in clock, and it generally does not run according to the clock. The turn-on time is generally triggered by monitoring the power generation current of the solar panel to trigger the turn-on circuit. The current value is generally set to 5ma.

With the use time of the solar panel, the value can be adjusted accordingly. New solar street light controllers support multi-period regulation The luminous power of the lamp can be set in different time periods and should be adjusted according to actual needs.

The solar street light controller has 2 ways to control time

1. Light control

Solar street light is a basic, convenient and versatile control method. This controller does not need to adjust the time, it will automatically sense the intensity of the light to control the light on and off.

After installation, there is no need to adjust the light on and off time according to the season. It is automatically off during the day and automatically on at night. This kind of light control is widely used in Li-ion solar street lights.

solar led street light controller

Some customers will ask if the street light will automatically turn on if it is cloudy. This needs to see the cloudy effect. Under the common cloudy effect, it will not light up. It will only light up under extreme conditions.

Of course, this kind of cloudy situation also requires lighting, and solar street lights are better than commercial LED street lights * The advantage is that they can also be illuminated in extreme weather because the voltage is 12v safe electricity, not afraid of leakage.

2. Time control

Time control is also a common way to control the time of solar street lights. It is to set the time in advance and turn on or off the lights at a certain time. It is a bit more troublesome than light control. It is necessary to adjust the time of turning on and off according to the season, so as not to cause the street lights to not turn on in time. More advanced time-controlled controllers can now modify the time remotely.

Through the above two basic methods, different combinations can also be made, such as the combination of light-controlled lighting + time-controlled lighting, time-controlled lighting + light-controlled lighting. Clodesun solar street lights are mainly based on light control time, so customers do not need to take care of the time to control the time, it will not cause unnecessary waste of electricity, and the overall price is relatively cheaper.

We usually talk about the time adjustment, and the general customers are pointing to solar street light controllers, solar intelligent controllers for off-grid solar systems. It has a continuous output for 24 hours and does not require users to adjust working hours. If you have special requirements, just need to install a timer on the load side to manage the switch on the load side

The solar street light controller controls solar street light time is mainly divided into ordinary split street light controller and constant current control integrated machine.

solar led street light motion sensor

1. Press the “Cancel” key four times to cancel the keyboard lock function, and the letters displayed in the lower-left corner will be blanked.

2. Press the “Clock” key once, then press the “School Week” key, the “Time” key, and the “Minute” key to adjust the time to the current time. After setting, press the “Clock” key to confirm. The LCD screen will display the current time.

3. Press the “Timer” button, and the word “1 ON” appears on the bottom left of the LCD screen (the first time on the table), and then press the “School Week” key, the “Scheduled” key, and the “Collected” key. Enter the required on time.

4. Press the “Timer” key again, and the word “1 OFF” appears on the lower left of the LCD screen (the first time off on the table), and then press the “School Week” key, the “Time Calibration” key, and the “Collect” key. , And enter the required closing time. Press the “School Week” key to set the working mode.

5. After the timing is set, press the “Clock” key to make the LCD display the current time. If you do not press the “Clock” key, the space-time switch will automatically switch to the clock mode after 30 seconds.

6. Connect the wires correctly according to the wiring diagram. Turn on the power and the red light on the panel will turn on. After the switch is turned on, the green light will turn on and the output will have a 220V voltage output.

7. Press the “Auto / Manual” key to directly open and close the circuit. To make the switch act automatically, first press this key to turn the arrow below the display to the “OFF” position, and then turn the arrow below the display to the “Auto” position so that the space-time switch can press the set time Work to achieve automatic control.

Each solar street light controller’s adjustment time is different, with the infrared interface, dedicated data cable, and networking can be adjusted through the network. The best solution is to let the supplier help you before leaving the factory. Complete the operation.

Editor: Belinda  Whatsapp: +8618123831633    Email:   web:

solar street light project in Tailand

Solar led street light project in Tailand

420 pieces foldable all in one solar led street light install in Tailand, Thanks for our customers’ good feedback and trust.

Name of project: solar street lights in Tailand

Location of works: Haad Yai Tailand

Progress of work: completed in 2019

Number of street lights: 420 sets 64w with 6m pole palm tree solar street light

solar led street light in Tailand

—Supplied by Integrated Solar Street Light Supplier in Tailand

solar led street light

Solar street light Exhibition in Saudi Arabia

It is clodesun’s honor that we make the customized German new design solar street light Exhibition in Saudi Arabia markets in November 17-19 2020.

Exhibition time: November 17-19, 2020

Exhibition location: Saudi Arabia-Riyadh-Riyadh International Convention Center KSA1560840388268.png

Organizer: Infoman

China Organizer: China Exhibition World Trade (Beijing) International Exhibition Co., Ltd.

1. Electricity: power station equipment, substation equipment, power transmission equipment, high and low voltage electrical switches, power control system testing equipment, cable and wire materials, generator sets and related equipment, relays, capacitors, junction boxes, etc.

2. Lighting: all kinds of lighting fixtures, equipment, switches, control systems and related accessories, etc.

3. New energy and renewable energy: solar installations, power and wind power installations, recirculation systems

(solid, liquid, steam), tidal energy installations, environment and energy consumption monitoring and services, etc.

4. Water conservancy: water storage tanks, water pipes, drainage and irrigation equipment, water pumps and engines, pure water purification equipment, wastewater recycling systems, water pollution monitoring and analysis equipment, various water treatment technologies and equipment, etc.

5. Nuclear energy: nuclear engineering, nuclear power plants and related projects, technologies and scientific research results, etc.

Saudi International Electricity, Lighting and New Energy Exhibition is one of the lighting and new energy exhibitions of Informa Exhibitions in Dubai, Egypt, Nigeria. Relying on the rich buyer resources and huge market promotion network of Informa Conference and Exhibition Group in related industries,.

MEE SAUDI 2020 will definitely provide a professional, efficient and localized market for the huge development needs of the power energy lighting market in Saudi Arabia and surrounding areas. An excellent trading platform.

Since 2016, we’ve become a top Solar Street Light Supplier in Saudi Arabia.


all in one solar street light project in Nigeria

Solar led street lights project in Nigeria

300 pieces solar led street lights project in Nigeria was success finished installed by Clodesun, which was praised by the local government and the university.

Case Study: Foldable all in one solar street light project for Nigeria customer

all in one solar street light

On March 20th, 2019, I got an inquiry from a Nigerian customer for the 80w solar led street light. We have quoted the solar street light 800 pcs to them. The customer accepted the price but they need some time to audit our company.

They were asking a lot of questions about the solar street light specifications; I also filled a lot of supplier audit forms. ISO9001/TS16949/IP66 was requested by them as well. They spent half a year investigating our company’s ability. Our engineer team and I were very patient to answer all the questions they had.

But after every investigation and audit was passed at end of the 2019. They still have not placed the order. I followed up every month, but no reply from the customer side.

In April of 2020, I had received an e-mail from the customer side they told me they decided to visit our factory in June. I was very excited when received this mail as it was been half year no news from this customer. They spent 1 week auditing our factory in June. Finally, they were happy with our company process and quality.

On June 15th, 2020,  I received an 80w solar street light PO from this client. it took almost 3 months to follow this customer, finally, I got a PO from them. As these samples were ready to produce and it was taking one and half years to confirm the samples, During these 1.5 years we have sent 6 times samples to them for confirmation. Finally, we got approval for the end of the sample of 2020.

On Jan 17th, 2020, I got the production PO from this customer. It was taking us 1.5 years to got this project successful. But it was worth this is what we need to do for our clients. We also believe suppliers and clients always need to do win-win business relationships.

Up to now, the client has placed backorders and is quite satisfied with our quality and plan to have a long-term forecast with us for 10 years production contract signed. Since then, we’ve become a top Solar Street Light Supplier in Nigeria.