Outdoor all-in-one integrated solar led street light make full use of energy from the sun – mono solar panel with high efficiency, LED source, intelligent controller, lithium battery are all in one. It uses excellent practical control technology such as controller with micro radar sensor, human infrared induction/PIR or micro motion sensor, etc.,
Combined with a simple integrated structural design, perfect for achieving higher brightness and lower power consumption (average 15W power = 200W incandescent lighting ), Long lifespan and free maintenance, strong waterproof and heat dissipation, and easy installation at the same time. All advantages make it be our company’s best patented product.
LiFePo4 battery All in one solar street light
- When installing lights, please take it lightly and gently, and it is strictly forbidden to collide or knock to avoid damage.
- There should be no tall buildings or trees in front of the solar panels to shield the sunlight, and choose to install without cover.
- All the screws for installing the lamps need to be tightened and screwed tightly, and there should be no loosening.
- Since the lighting time and power are set according to the factory specifications,if need special lighting mode should benotified before placing the order.
- When repairing or replacing the led chip, lithium battery, controller,type and power must be the same as our original,It is strictly forbidden to replace the light source with different power models from any other manufacture.
- When replacing internal parts, wiring must be strictly in accordance with the corresponding wiring diagram. The positive and negative poles are clearly separated, and reverse connection is strictly prohibited.
Widely used in branch roads, streets, and factory roads, parks, villages, mountains and remote areas, lighting projects, courtyards, schools,plaza and other places that require outdoor lighting,Helping domestic traditional lighting upgrade to LED green new energy lighting.
- All-in-one Solar street light” will not work without sun. Please choose the matched model according to the local Sunlight intensity or the total annual radiation of solar energy. In the area of lacking sunlight or in long continuous rainy days, the working time of solar lights would be shortened or can not light up, All-in-one light with mains supply or solar dual-mode electric power supply is suggested to choose in such cases.
- All-in-one Solar street light” selects long life span lithium battery as energy storage device. Discharge condition at night is at temperature – 20℃ ~ + 75℃, battery performance will be damaged beyond this range. Please make sure the local extreme temperature does not exceed the above condition when choosing the “All-in-one models”.
- “All-in-one Solar street light”, after fully charged, the battery longest store time can be up to six months. Check the battery in time after long time transport or storage, charge and record it on a regular time. Otherwise, the battery will be damaged.
- When installing “All-in-one Solar street light”, make the solar panel towards the direction of the sun as far as possible in order to get maximum energy and meanwhile avoid houses or the shadow of obstacles such as trees, otherwise it will reduce the generating efﬁciency of the solar panel, and due to a shorten working time.
- “All-in-one Solar street light”, the clean-up performance of solar panel surface also affects the generating efﬁciency of the solar panel. So its surface needs to be cleaned, such as dust, leaves, greasy dirt, etc., scrubbed with ordinary cleaner on a regular time is suggested.
- “All-in-one Solar street light”, its internal parts are with good waterproof design, all reach IP65 standard. Ventilation holes and cracks on the shell are specially designed for the cooling and drainage. Metal parts are all made of corrosion resistance aluminum or stainless steel, which can tolerate the strict environment of the sea or high heat and high humidity desert.