Product Introduction

The LKAS Series is an all-in-one solar street light available in 30W, 40W, 60W, 80W, 100W, 120W, and 150W versions. It integrates a monocrystalline solar panel, lithium iron phosphate battery, SMD5050 LED modules, MPPT controller, and radar sensing into a single aluminum fixture, simplifying equipment selection for road and area-lighting projects. Buyers evaluating system components can also review the basics of a solar street light with a pole and battery.

With luminous flux from 6600LM to 33000LM, 220LM/W efficacy, and recommended installation heights from 5m to 16m, the range covers projects from community paths to highways and industrial roads. Each integrated solar street lamp combines intelligent light control with segmented time control, while the LiFePO4 battery provides 2-3 rainy days of discharge time.

Key Features & Benefits

• 18V monocrystalline solar panel, from 55W to 180W → Gives each wattage a matched solar input for dependable off-grid charging.
• Lithium iron phosphate battery, from 240WH to 1152WH → Delivers 3000 cycles at DOD/80% and supports 2-3 rainy days, reducing replacement and service pressure for operators.
• SMD5050 LEDs with 220LM/W efficacy → Produces 6600LM to 33000LM while making efficient use of stored solar energy.
• MPPT controller with intelligent light control, time control, and radar sensing → Automates energy management and provides operational flexibility; the practical tradeoffs of this function are covered in this guide to solar street lights with motion sensors.
• Three remote-control programs → Mode A uses motion sensing, Mode B uses timed output, and Mode C combines time and sensing, so project operators can match lighting behavior to traffic patterns.
• 15m effective sensing range and adjustable 15°/20°/25°/30° angle → Helps tune detection and fixture orientation for the installation site.
• IP65 protection and IK08 impact resistance → Protects the all-in-one solar street light against outdoor water exposure and physical impact.
• AL6063+ADC12+1060 pure aluminum construction → Combines extruded, die-cast, and pure aluminum components for a durable outdoor housing.
• 60/76mm adjustable sleeve with model-specific 5-16m mounting recommendations → Supports common pole interfaces across different road widths and lighting requirements; installers can follow this overview of how to install a solar street light.
• T2/T2M light angle and 2700-6500K CCT → Gives lighting designers road-oriented distribution and a broad color-temperature choice.
• -20-65°C temperature range and 3-year warranty → Supports projects across varied climates with a defined warranty period.

Technical Data

FCC / IEC60598 / IEC62722 / IEC62471 / LM79 / IK08

CE / RoHS / 3 YEARS WARRANTY / LM-80 / IP65

MODEL NUMBER	LKAS-30W	LKAS-40W	LKAS-60W	LKAS-80W	LKAS-100W	LKAS-120W	LKAS-150W
Power	30W	40W	60W	80W	100W	120W	150W
Solar Panel	18V/55W Mono	18V/67W Mono	18V/85W Mono	18V/100W Mono	18V/120W Mono	18V/150W Mono	18V/180W Mono
Battery	Lithium iron phosphate 3.2V,75AH, 240WH	Lithium iron phosphate 3.2V,105AH, 336WH	Lithium iron phosphate 12.8V,30AH, 384WH	Lithium iron phosphate 12.8V,45AH, 576WH	Lithium iron phosphate 12.8V,60AH, 768WH	Lithium iron phosphate 12.8V,75AH, 960WH	Lithium iron phosphate 12.8V,90AH,1152WH
LED	SMD5050, 28PCS	SMD5050, 56PCS	SMD5050, 56PCS	SMD5050, 84PCS	SMD5050, 112PCS	SMD5050, 112PCS	SMD5050, 140PCS
Component size	8083944mm	9333944mm	11423944mm	11584504mm	13754504mm	16834504mm	15135784mm
Product Size	81340070mm	93540070mm	114340070mm	116346570mm	138046570mm	168846570mm	158558570mm
Luminous Flux	6600LM	8800LM	13200LM	17600LM	22000LM	26400LM	33000LM
N.W.	10.3kg	11.6kg	13.4kg	15.8kg	18.6kg	21.8kg	28kg
Lamp post diameter	60/76mm	60/76mm	60/76mm	60/76mm	60/76mm	60/76mm	60/76mm
CCT	2700-6500K	2700-6500K	2700-6500K	2700-6500K	2700-6500K	2700-6500K	2700-6500K
Cycle life	3000 times， DOD/80%	3000 times， DOD/80%	3000 times， DOD/80%	3000 times， DOD/80%	3000 times， DOD/80%	3000 times， DOD/80%	3000 times， DOD/80%
Optional lighting mode	Intelligent control + segmented time control	Intelligent control + segmented time control	Intelligent control + segmented time control	Intelligent control + segmented time control	Intelligent control + segmented time control	Intelligent control + segmented time control	Intelligent control + segmented time control
Material	AL6063+ADC12+1060 pure aluminum	AL6063+ADC12+1060 pure aluminum	AL6063+ADC12+1060 pure aluminum	AL6063+ADC12+1060 pure aluminum	AL6063+ADC12+1060 pure aluminum	AL6063+ADC12+1060 pure aluminum	AL6063+ADC12+1060 pure aluminum
Efficacy	220LM/W	220LM/W	220LM/W	220LM/W	220LM/W	220LM/W	220LM/W
Charging time	4-6hours	4-6hours	4-6hours	4-6hours	4-6hours	4-6hours	4-6hours
Protection grade	IP65	IP65	IP65	IP65	IP65	IP65	IP65
Controller	MPPT controller + intelligent light control + time control + radar sensing	MPPT controller + intelligent light control + time control + radar sensing	MPPT controller + intelligent light control + time control + radar sensing	MPPT controller + intelligent light control + time control + radar sensing	MPPT controller + intelligent light control + time control + radar sensing	MPPT controller + intelligent light control + time control + radar sensing	MPPT controller + intelligent light control + time control + radar sensing
Light angle	T2/T2M	T2/T2M	T2/T2M	T2/T2M	T2/T2M	T2/T2M	T2/T2M
Temperature	-20-65°C	-20-65°C	-20-65°C	-20-65°C	-20-65°C	-20-65°C	-20-65°C
Discharge time	2-3 rainy days	2-3 rainy days	2-3 rainy days	2-3 rainy days	2-3 rainy days	2-3 rainy days	2-3 rainy days
Installation Height Recommended	5-6m	6-8m	8-10m	10-12m	12-13m	12-14m	14-16m

Application Scenarios

• Rural roads: The 30W and 40W models suit recommended installation heights of 5-8m, while radar sensing and timed output help conserve stored energy when nighttime traffic is intermittent.
• Community streets: The 60W model provides 13200LM at a recommended 8-10m installation height, supporting residential-road lighting without dependence on grid power.
• Urban streets: The 80W and 100W configurations produce 17600LM and 22000LM for recommended mounting heights of 10-13m, while T2/T2M distribution directs light along the roadway.
• Highways: The 120W and 150W models deliver 26400LM and 33000LM and are recommended for 12-16m installation heights, giving engineers higher-output options for major roads.
• Industrial park roads: IP65 protection, IK08 impact resistance, and the aluminum construction help the fixture withstand exposed operating environments around factories and logistics facilities.
• Car parks: Radar sensing with a 15m effective range allows output to respond to activity, while Mode C combines scheduled and sensor-controlled levels throughout the night.
• Farm roads and off-grid villages: LiFePO4 energy storage and 2-3 rainy days of discharge time make the all-in-one solar street light practical where grid access is absent or unreliable.
• Mining operations: The -20-65°C operating range, IP65 protection, and model options up to 150W support remote, demanding outdoor sites when matched to the required installation design.

Why Choose Us

• 11+ years of international project experience: Clodesun was established in Shenzhen in 2013 and has supplied projects across more than 100 countries and regions.
• Documented development capability: The R&D team had accumulated 280 appearance and utility model patents by 2021, supporting continued development of all-in-one and German-designed foldable solutions.
• Scalable, certified production: A modern production workshop and aging-test workshop support monthly output of more than 10,000 sets. The factory has passed ISO9001, ISO14001, and SGS certification, while the products comply with CE, RoHS, IES, and TUVIP66 criteria; the LKAS data sheet also lists FCC, IEC60598, IEC62722, IEC62471, LM79, LM-80, IK08, and IP65.
• Engineering support from design to installation: Engineers provide installation schemes and practical advice to help customers execute projects smoothly.

MOQ:

1 unit is still welcomed. The more you order, the better price you get.

FAQ

Which LKAS solar street light wattage should I choose for my pole height?

Choose 30W for 5-6m, 40W for 6-8m, 60W for 8-10m, 80W for 10-12m, 100W for 12-13m, 120W for 12-14m, or 150W for 14-16m according to the LKAS recommended installation heights. Final selection should also account for the road geometry and required illuminance; photometric project design beyond these recommendations requires confirmation.

How many lumens and how much battery capacity does each LKAS model provide?

The LKAS range produces 6600LM to 33000LM and provides 240WH to 1152WH of battery capacity, depending on wattage. The outputs are 6600LM at 30W, 8800LM at 40W, 13200LM at 60W, 17600LM at 80W, 22000LM at 100W, 26400LM at 120W, and 33000LM at 150W, with a stated efficacy of 220LM/W. The series uses lithium iron phosphate batteries rated for 3000 times at DOD/80%, and the technical data states a charging time of 4-6hours.

Will the LKAS solar street light work through rainy weather or low-sunlight periods?

The LKAS data sheet specifies a discharge time of 2-3 rainy days. Actual autonomy in a specific low-sunlight location depends on local solar irradiation, programmed brightness, season, and site conditions, so the project-specific result is [Requires Confirmation: solar irradiation and lighting profile for the installation site].

How is the LKAS fixture installed, and what pole connection does it use?

The LKAS uses an adjustable sleeve for 60/76mm lamp-post diameters and supports angle settings of 15°/20°/25°/30°. Recommended mounting heights range from 5m to 16m by model; detailed wiring, foundation, torque, and pole-loading requirements are [Requires Confirmation: project installation drawings and pole specification].

What intelligent lighting modes are available on the LKAS solar street lamp?

The LKAS offers three remote-control modes: motion sensor, time control, and combined time-plus-sensor control. Its controller combines MPPT charging, intelligent light control, time control, and radar sensing, with an effective sensing range of 15 meters.

Does the LKAS Series meet the certifications needed for Europe and international projects?

The LKAS data sheet lists CE, RoHS, FCC, IEC60598, IEC62722, IEC62471, LM79, LM-80, IK08, and IP65. Suitability for a specific tender or destination market is [Requires Confirmation: current certificates, test reports, issuing bodies, and the exact regulatory requirements of the target market].

What are the MOQ, warranty, lead time, and OEM options for distributors?

The MOQ is 1 unit, larger orders can receive better pricing, and the LKAS Series has a 3-year warranty. Production capability is stated at more than 10,000 sets per month, but order-specific lead time and customization are [Requires Confirmation: order quantity, destination, OEM requirements, and current production schedule].

How does the LKAS compare with split solar street lights or grid-powered street lights?

The LKAS integrates the monocrystalline panel, LiFePO4 battery, LED modules, and controller in one fixture, whereas a split configuration places key components separately. The provided data does not quantify installed cost, maintenance cost, or performance against split or grid-powered alternatives, so those comparisons are [Requires Confirmation: project design, energy cost, civil-work scope, and selected alternative model].