The ClodeSun CM Series represents a strategic leap in B2B solar infrastructure. Engineered specifically for engineering contractors and regional distributors, this “All-in-One” system eliminates the logistical headaches of traditional lighting. By integrating the high-conversion solar panel, LiFePO4 battery, and high-lumen LED chips into a single, sleek unit, we provide a specialized solution that outperforms rigid, massive factory alternatives in both agility and technical support.
| Technical Parameter | Specification |
|---|---|
| Battery Technology | LiFePO4 (Lithium Iron Phosphate); 6,000+ Deep Cycles |
| Luminous Efficacy | Up to 210 lm/W (High-power LED chips) |
| Ingress Protection | IP65 Certified (Monsoon-resistant) |
| Operating Temperature | -20°C to +85°C (-4°F to 185°F) |
| Charge Time | 4-6 Hours (Peak Sun) |
For the Engineering Contractor, time is margin. The CM Series requires zero trenching and zero wiring, allowing for a 15-minute installation per pole. The system is compatible with pole diameters from 1 to 3 inches, with a recommended installation height of $4-5$ meters (13-15 feet), making it ideal for government bids and rapid property developments. This reduces on-site labor costs and minimizes project timelines.
Unlike standard consumer units that fail within two years, our Regional Distributors benefit from high-capacity LiFePO4 batteries designed for a 10-year service life. With over 6,000 cycles, these systems minimize warranty claims and post-sale maintenance, protecting your reputation and your bottom line. This level of reliability is essential for meeting international standards like those set by the International Electrotechnical Commission (IEC).
The CM Series features an integrated microwave motion sensor and sunlight control (Dusk-to-Dawn). To ensure maximum battery autonomy during harsh monsoon periods, the system operates at 30% brightness, surging to 100% within 1 second of motion detection. This intelligent scaling is a key technical requirement for motion-sensor solar lighting projects where energy conservation is paramount.
Our IP65-rated housing is built to withstand high heat and humidity. Whether deployed in the Middle East—meeting SASO standards—or in tropical regions, the CM Series utilizes high-power LED chips with low light attenuation to ensure consistent lumen output even after years of exposure to UV and high temperatures.
What makes the CM Series LiFePO4 battery superior for B2B projects?
The CM Series uses Lithium Iron Phosphate (LiFePO4) which supports over 6,000 charge cycles. For B2B buyers, this translates to a 10-12 year operational life, drastically reducing the Total Cost of Ownership (TCO) compared to standard lithium batteries that fail after 1,000 cycles.
How long does the CM Series take to reach a full charge?
Thanks to high-efficiency polycrystalline or monocrystalline panels (depending on specific model configuration), the CM Series can be fully charged in just 4-6 hours of peak sunlight, ensuring reliable operation even in regions with shorter daylight windows.
Is the CM Series suitable for high-humidity and coastal environments?
Yes. With an IP65 waterproof rating and a wide operating temperature range (-4°F to 185°F), the unit is designed to resist corrosion and moisture infiltration, making it a preferred choice for all-in-one solar street light installations in monsoon-prone or desert climates.
Can the motion sensor be customized for specific project needs?
The built-in intelligent sensor is programmed to optimize battery life by defaulting to a 30% energy-saving mode, instantly switching to 100% brightness upon detection. This ensures the light lasts through the entire night, even during consecutive cloudy days.
What are the mounting requirements for contractors?
The CM Series is designed for “plug-and-play” installation on walls or poles with diameters ranging from 1 to 3 inches. We recommend a mounting height of 13-15 feet for optimal light distribution and PIR sensor coverage.
