solar street light Lithium-ion battery
Solar street light Li-ion battery Wiring method
1. Wiring method of lithium-ion battery pack and solar LED light, load output: positive and negative (red wire represents positive electrode, black wire represents negative electrode); the positive electrode is connected to the positive electrode of the LED light, and the negative electrode is connected to the negative electrode of the LED light.
2. Wiring method of lithium-ion battery pack and solar panel, solar input: positive and negative (red wire represents positive electrode, black wire represents negative electrode); the positive electrode is connected to the positive electrode of the solar panel, and the negative electrode is connected to the negative electrode of the solar panel.
Li-ion battery for solar street light installation steps
1. Connect all connecting wires and check whether the charging indicator (green light G) is on normally.
2. If it is on normally, unplug the solar input after 10 seconds, the load output LED light is on normally.
3. Reconnect the solar input and the load output LED will go out after 10 seconds.
4. After all the above steps are over, the solar street light can be used normally
Clodesun has 10 years of experience in producing solar and LED lighting, making our design perfectly adapted to the market’s needs. Clodesun is passionate about solar streetlights and loves sharing our knowledge with the world.
